Death Watch Airborne

Model MW-7642, Photo by KP
Description: Death Watch Airborne
Prefix: MW
Detachment: Bounty Hunters Guild
Context: The Clone Wars, Season 4/5

The Deathwatch are a faction of Mandalorians resistant to the pacifist ways of Duchess Satine and dedicated to returning Mandalore to their warrior heritage.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Animated style helmet required.
• Ear caps are symmetrical, with range finder on the right hand side of the helmet.
• Helmet is dark gray with a bright blue visor area, ear caps and keyslot
• The upper cheeks are white
• The rangefinder is dark gray
• 2 Yellow rectangles on Left & Right side of front dome to match the visual reference
• The helmet is heavily weathered to match references with various shades of grey, silver, and black
• No physical damage (slashes, dents, etc) is allowed
• A dark smoke visor extends to the bottom of the helmet

• Navy Blue in color.
• Has traditional Mandalorian style double sleeves.
• Neck seal should be built into the suit and is essentially a high collar as per the visual reference. (This is not a Fett style neckseal)
• No pockets should be visible.
• Flight suit must be fitted to the wearer with minimal blousing, with the exception of slight blousing above the ankles
• Material is weathered with shades of grey, black, and white to match visual references

• Navy Blue leather, leather-like, or heavy material vest.
• Shoulders flare outward like wings.
• �Jango Style� vest is required
• Vest closes down the back
• Bottom of vest ends approximately 1�-1.5� below the bottom of the chest / back armor, and not be tucked into the girth belt, to allow for some flightsuit to show.
• Material is weathered with shades of grey, black, and white to match visual references

• Consists of Animated Style collar armor, left and right breast plates, a center diamond and an abdominal plate.
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Collar armor is Med/Dark Gray
• Chest and Abdominal Armor Color is Med/ Dark Gray with Blue
• Left breast plate must have two indented horizontal bars, painted Blue
• Right breast plate has a Roundish Off White Logo matching visual references.
• Center diamond plate between breast plates must have a raised vertical rectangle as shown in visual references.
• The diamond is blue to match the armor.
• The raised rectangle is silver
• Must attach securely to the front of the vest
• The armor is heavily weathered to match references with various shades of grey, silver, and black
• Note: the slots in the main chest plate are in the wrong position. Please review to version B for proper placement of the slots. A new photo of this chest place has been requested.

• Consists of Animated Style collar armor, left and right breast plates, a center diamond and an abdominal plate.
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS.
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Collar armor is Med/Dark Gray with Blue
• Chest and Abdominal Armor Color is Med/ Dark Gray with Blue
• Left breast plate must have two indented horizontal bars, painted Blue
• Right breast plate has a Roundish Off White Logo matching visual references.
• Center diamond plate between breast plates must have a raised vertical rectangle as shown in visual references.
• The diamond is blue to match the armor.
• The raised rectangle is silver
• Must attach securely to the front of the vest
• The armor is heavily weathered to match references with various shades of grey, silver, and black

• Animated Style Shoulder Armor
• Must have dimension and give the feeling of thickness and depth.
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• No physical damage (slashes, dents, etc) is allowed
• Shoulder armor is Med/ Dark Gray with Blue to match the armor.
• Right shoulder armor has Red / Yellow Logo as shown in visual reference.
• Shoulder armor should flare out, off the shoulders to present a wider than normal silhouette.
• The armor is heavily weathered to match references with various shades of grey, silver, and black

• Animated Style Gauntlet
• Must be made of a solid material such as fiberglass, resin, styrene, sintra or Vac-formed ABS.
• No physical damage (slashes, dents, etc) is allowed
• Gauntlet tapers toward the wrist.
• Gauntlet opens on the inside of the arm with indents on either side of the seam as shown.
• No hinge method is visible when worn
• Color is silver/light gray
• The gauntlet is heavily weathered to match references with various shades of grey, silver, and black

• Animated Style Gauntlet
• Must be made of a solid material such as fiberglass, resin, styrene, sintra or Vac-formed ABS.
• No physical damage (slashes, dents, etc) is allowed
• Gauntlet tapers toward the wrist.
• Gauntlet opens on the outside of the arm with indents on either side of the seam as shown
• Color is Med/ Dark Gray
• The right gauntlet contains the following components as shown in visual references:
• Console on the top of the gauntlet with an angled front plate.
• Two silver or gray blasters protrude from the angled faceplate
• The top plate of the console sits slightly lower than the top of the faceplate and has a recessed rectangular section containing 5 buttons (2 circular white, 3 rectangular red)
• The two white buttons are circular and sit side by side at the rear of the console
• The three red buttons are rectangular. The first sits horizontally across the console in front of the two white buttons and the remaining two sit vertically side by side in front of the horizontal button.
• Rocket housing with 4 small rockets on the inside of the gauntlet. This is attached with its top approximately level with the bottom of the console.
• The rear of the housing, where the hose connects, should be level with the rear of the console.
• A smooth surfaced Black or Dark Grey tube, approximately �� in diameter attaches to the back of the housing and sits close to the arm, running inside the arm and attaching inside the outer sleeve of the flightsuit.
• Rocket housing with 1 larger rocket on the outside of the gauntlet.
• The top of the housing should be flush with the top section of the console.
• The rear of the housing, where the hose connects, should be level with the rear of the console.
• A smooth surfaced Black or Dark Grey tube, approximately �� in diameter, attaches to the back of the housing and sits close to the arm, running outside the arm and attaching inside the outer sleeve of the flightsuit
• The gauntlet is heavily weathered to match references with various shades of grey, silver, and black

• Navy blue over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
• Material is weathered with shades of grey, black, and white to match visual references

• Animated Style Hand Plates
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Roughly hexagonal shaped hand plates matching references.
• Color is Med/ Dark Gray
• Both hand plates have 4 Silver mini rockets/darts protruding from a recessed housing
• The tips of the rockets are level with the front edge of the handplate
• Four silver ridges across the top of the housing, aligned with mini rockets/darts.
• Armor is weathered with shades of grey, black, and silver to match visual references

• Animated Style Back Plate
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Color is Med/Dark grey.
• Collar and backplate do not overlap.
• Armor is weathered with shades of grey, black, and silver to match visual references

• Brown leather or leather like material.
• Typically 5.5'-6.5" wide, depending on the height of the wearer but should matching the spacing in the visual reference.
• Material is weathered with shades of grey, black, and white to match visual references

• Animated Style Belt
• Segmented belt worn outside of the girth belt.
• No physical damage (slashes, dents, etc) is allowed
• Plate size/positioning must match visual reference.
• Color is Med/ Dark Gray
• Material is weathered with shades of grey, black, and silver to match visual references

• Animated Style Armor
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Triangular cod piece with rounded bottom edge.
• Color is Med/Dark Gray with some Blue
• Armor is weathered with shades of grey, black, and silver to match visual references

• Animated Style Armor
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Triangular cod piece with rounded bottom edge.
• Color is Med/Dark Gray with Blue (more blue than Type A)
• Armor is weathered with shades of grey, black, and silver to match visual references

• Animated Style Armor
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Wraps around outer thigh.
• Holsters are integrated with the armor with no visible seams
• Must have no visible straps / attachment.
• Color is Med/ Dark Gray
• Armor is weathered with shades of grey, black, and silver to match visual references

• Animated Style Armor
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Color is Sliver/ Dark Gray (Smooth Front)
• Must attach securely to the front of the knees over the flightsuit with no straps or visible means of attachment.
• Armor is weathered with shades of grey, black, and silver to match visual references

• Animated Style Armor
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Color is Sliver/ Dark Gray with Blue (Smooth Front)
• Must attach securely to the front of the knees over the flightsuit with no straps or visible means of attachment.
• Armor is weathered with shades of grey, black, and silver to match visual references

• Animated Style Armor
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Front panel and outline of side panels is blue, center of side panels are Silver/ Light Gray
• Each shin has 5 shin darts. 3 across the top at the top edge of the center panel, 2 across the bottom at the bottom edge of the center panel. Color is Medium/Dark Grey.
• Armor is weathered with shades of grey, black, and silver to match visual references

• Black boots
• Palladium boots Pampa Hi in black canvas or Brahma Banjo boots are an example of acceptable styles.
• No laces are visible
• Visible surfaces are weathered with shades of grey, black, and white to match visual references

• Animated Style Armor
• Must be made of a solid material such as fiberglass, styrene, sintra or ABS
• Consists of three pieces � toe cap, heel cap and spat
• Must have dimension and give the feeling of thickness and depth.
• No physical damage (slashes, dents, etc) is allowed
• Color is gray
• Boot armor covers the top of the foot, hiding laces if present.
• Boot armor must connect with no visible means of attachment.
• Armor is weathered with shades of grey, black, and silver to match visual references

• Animated Style Jetpack
• No physical damage (slashes, dents, etc) is allowed
• Color is Med Gray with the rectangular panels to either side of the center tank painted blue.
• Thruster nozzles are Med/ Dark Gray
• Center tank topper is slightly larger, similar shape to side tank toppers
• The two outer tank toppers have a horizontal white ring directly above a blue ring, ending at the main section of tube.
• Jetpack is weathered with shades of grey, black, and white to match visual references

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Animated style pistols to fit into thigh holsters
• Painted in light/medium gray with a dark gray finish on the handles and slide to match the visual references.
• Pistols are weathered with shades of grey, black, and silver to match visual references

• Animated style carbine (long version of the pistol)
• Painted in light/medium gray with a dark gray finish on the handles and slide to match the visual references.
• Carbine is weathered with shades of grey, black, and silver to match visual references

• A Commlink/Shield generator may be added on the top of the left gauntlet
• Color is dark grey
• Must match visual reference
• Commlink is lightly weathered with shades of grey, black, and silver to match visual references