Greedo - A New Hope

Model BH-12058, Photo by Javiera Torres
Description: Greedo
Prefix: BH
Detachment: Bounty Hunters Guild
Context: Star Wars: A New Hope

A Rodian Bounty Hunter who worked for Jabba the Hutt, Greedo was looking to cash in on the bounty Jabba placed on Han Solo�s head.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Head shape and details are of the Hero mask worn by Paul Blake.
• The entire Mask is green, similar to PMS 3285-C, with the exception of the eyes which are dark blue/purple, similar to PMS 276-C.
• Mask is made of latex, silicone, or other similar material.
• Eyes are spherical and fully conceal the costumer�s eyes.
• A mane/mohawk extends from the top of the head, just behind the tentacles, to the collar in the back.
• The �hairs� should be between 1.5" to 2" (4 cm � 5 cm) tall, but not taller than the tentacles.
• Paint on the head matches the paint scheme on the hands.

• Hands are the same color as the head, similar to PMS 3285-C and made of latex, silicone, or other similar material.
• The hands have elongated fingers, extending roughly 9" to 10" (22 cm � 25 cm).
• Each hand has five skinny fingers with suction cup tips and no visible knuckles.
• The wrist section completely covers the costumer�s hand and tucks into the sleeve.
• Paint on the hands match the paint scheme on the head.

• Suit is primarily greenish blue, similar to PMS 2235-C, with yellow ribbed pleated racing stripes similar to PMS 7499-C.
• Suit is made of a cotton/polyester fabric with only a slight sheen.
• A 2" (5 cm) collar extends up from the body of the suit and closes in the back of the neck.
• A seam halfway up the collar extends horizontally around the neck dividing it into two visible portions.
• The suit zips up the back and the zipper should be hidden from view under the vest.
• A double seam runs from the crotch up to the collar in the middle of the suit.
• Racing stripes start at the collar and extend down each arm, to the wrists.
• Identical stripes start under the armpits and extend down to the ankles.
• Each yellow stripe has pleats that are approximately 1" (2.5 cm) tall with no gaps in between:
• Sleeve stripes are approximately 4 � 5" (10 cm � 13 cm) wide, or approximately half the circumference of the sleeves at the wrist.
• Leg stripes are a bit wider than the arms, but slightly less than half the circumference of the leg at the ankle.
• The suit has a slight puffy appearance, including the racing stripes, giving it a quilted look.
• Sleeves are slightly thicker looking than the body of the suit, similar to the look of the collar.

• Vest is made of heavy cotton/canvas and is light brown in color, similar to PMS 2317-C.
• Vest length terminates approximately 2" (5 cm) above the belt.
• Four pockets appear on the front of the vest; two on each side.
• All pockets are in a vertical line, starting approximately 2" (5 cm) outwards from the centerline of the vest (or in similar proportion to the wearer).
• Top left pocket is approximately 3" � 4" (7.5 cm � 10 cm) square.
• Top right pocket is oddly shaped with a narrow top, and an open slanted section that extends outward so the pocket at the bottom is the same width as the one below it.
• The top two pockets are vertically offset by approximately �" (12.5 mm), with the left breast pocket starting higher than the right, and approximately 1? (2.5 cm) down from centerline corner of the vest.
• The bottom two pockets are approximately 4" � 5" (10 cm � 13 cm) in height, and slightly wider than they are tall.
• Both end approximately 2" (5 cm) from the vest bottom banding.
• Three pockets are covered by a flap that is sewn at the sides and is approximately ?ths the size of the whole pocket.

• Belt is gray, similar to PMS 425-C, approximately 2" (5 cm) wide and is made of nylon or similar material.
• A single silver snap or rivet that gives the appearance of securing the belt is visible in the front.
• Belt terminates under one of the belt boxes and is hidden from view.
• The belt is worn at the wearer�s waist, slightly below belly button.

• Five silver boxes, similar to Imperial Officer/Chewbacca bandoleer style belt boxes are worn horizontally.
• Dimensions are approximately 2 �" (63.5 mm) by 3 �" (88.9 mm) by 1" (25.4 mm) thick.
• There are 5 boxes total, in the following configuration:
• One box just left of center in the front.
• One box on the font and back of the left hip.
• One box to the left and right of the middle in back.

• The holster is made of brown leather or leather-like material and is worn off the right hip, hanging down to the middle of the wearer�s thigh.
• Holster is a single piece, approximately 5" � 6" wide (12.5 cm � 15.5 cm), which wraps around to form the blaster pocket and secures to the belt with two loops attached at each corner with rivets.
• Upper, outward facing section of the holster is lighter in color than the wrap around section that forms the holster pocket.
• Holster pocket shape tapers at an angle on the back end where the wrap around section terminates, and the angle of the muzzle opening is almost level with the ground.
• A strap to hold the weapon in place attaches to the holster and closes with a silver snap fastener.

• Boots are above ankle in height and made of leather or leather-like material with small U-shaped elastic sections appearing on both sides of the ankle.
• No visible buckles or laces are present.
• Boots have a flat sole with a short heel and are painted white.
• Jodhpur / Chelsea-type boots or an equivalent style is acceptable.
• Elvis or Mariachi boots are not allowed.
• Boots are white and lightly weathered with browns.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Blaster is based off of the Ruger Mk.1 with a blued steel look with silver weathering.
• Multiple cylinders and greeblies are attached to the sides of the blaster.
• A sharpened stylus type structure with a triangular, sharpened forward tip attached, is present just above the trigger section on each side.
• A small canister, or Power Twinkie, is seen just above the stylus on the right side of the barrel.
• On top of that is a threaded cylindrical structure, UG-175 assembly, with an identical Power Twinkie above it.
• At the top of the barrel is a sight antennae assembly with coned tips and a thick wire running through the middle and extending from the front and back by roughly 1" (2.5 cm).
• There is an Imperial insignia greeblie on each side of the grip.
• A ribbed, cone-shaped flash suppressor is present at the end of the barrel.