Pre Vizsla

Model MW-6065, Photo by Ruud Wolters
Description: Pre Vizsla
Prefix: MW
Detachment: Bounty Hunters Guild
Context: Star Wars The Clone Wars Season 2

Pre Vizsla was the governor of the Mandalorian moon Concordia. He was also the leader of the Deathwatch, a faction of Mandalorians dedicated to returning their people to their warrior heritage. Vizsla allied with the Separatists to aid in his quest to overthrow the pacifist Duchess Satine.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Animated style helmet required.
• Ear caps are symmetrical, with no range finder.
• Helmet is dark grey / metallic graphite with a lighter grey visor area, blue cheek indents, a blue rear with a grey key slot area.
• Helmet has an off white / cream colored trident emblem painted on the forehead.

• Light blue in color with grey stripes and a dark blue Deathwatch emblem.
• Worn over right shoulder.
• Attached via a black strap worn around the neck.

• Green-grey to charcoal in color.
• Blue stripes 1" - 1.25" wide run down the outside of the legs, and around the top and bottom of the knee armor.
• Has traditional Mandalorian style double sleeves.
• Neck seal is built into the suit.
• No pockets are visible.

• Black leather or leather like vest.
• Shoulders flare outward like wings.

• Armor has dimension giving the appearance of thickness and depth.
• Shoulder armor is blue to match the collar.
• Shoulder armor has red/off white details as shown in visual reference.
• Shoulder armor flares out off the shoulders to present a wider than normal silhouette.

• Gauntlet color is dark grey / metallic graphite to match helmet and armor.
• Gauntlets taper toward the wrist.
• Gauntlets have a seam on the inside of the arm with indents on either side of the seam as shown.
• Gauntlets have a stepped detail on the top center as shown.
• Right gauntlet has red markings as shown.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Armor has dimension giving the appearance of thickness and depth.
• Symmetrical, tombstone shaped handplates.
• Color is dark grey / metallic graphite to match helmet and armor.

• Consists of collar armor, left and right breast plates, a center diamond and an abdominal plate.
• Armor is made of a solid material such as fiberglass, styrene or sintra.
• Armor has dimension giving the appearance of thickness and depth.
• Collar armor is blue with a 1.25" dark grey / metallic graphite line down the center.
• Armor Color is dark grey / metallic graphite to match helmet.
• Left breast plate has two indented horizontal bars.
• The top bar is colored red.
• The bottom bar is colored dark blue.
• Center diamond plate between breast plates has a raised vertical rectangle as shown in visual references.
• The diamond is blue to match the collar.
• The raised rectangle is dark grey / metallic graphite to match the armor.
• Armor attaches securely to the front of the vest.

• Armor has dimension giving the appearance of thickness and depth.
• Color is blue to match the collar.
• Has a 1.25" dark grey/metallic graphite stripe down the center top.
• Collar and backplate do not overlap.

• Either the TV series or alternate paint scheme jetpack is required for approval.
• Animated style sculpt required
• Paint scheme as shown.

• Either the TV series or alternate paint scheme jetpack is required for approval.
• The alternate paint scheme is used on all Pre Vizsla merchandise: Action figure, Gentle Giant maquette, inflatable jetpack, Galactic Heroes etc...
• Animated style sculpt required
• Paint scheme as shown.

• Brown leather or leather like material.
• 6-8" tall depending on the height of the wearer.

• Segmented belt worn outside of the girth belt.
• Plate size/positioning matches visual reference.
• Color is dark grey / metallic graphite to match helmet and armor.
• Blue stripes 1" - 1.25" wide on the sides, lined up with stripes on the flight suit.

• Armor has dimension giving the appearance of thickness and depth.
• Triangular cod piece with rounded bottom edge.
• Color is dark grey / metallic graphite to match helmet and armor.

• Armor has dimension giving the appearance of thickness and depth.
• Wraps around outer thigh.
• Holsters are integrated with the armor.
• Armor has no visible straps / attachment.
• Blue stripe 1" - 1.25" runs down the outer thigh, to the front of the holster, lining up with stripes on the flight suit.

• Armor has dimension giving the appearance of thickness and depth.
• Main color is dark grey / metallic graphite to match helmet and armor.
• Outer tabs on the armor are blue to match the collar.
• Armor attaches securely to the front of the knees, over the flightsuit, with no straps or visible means of attachment.

• Armor has dimension giving the appearance of thickness and depth.
• Color is dark grey / metallic graphite to match helmet and armor.
• Each shin has a blue line 0.75" wide running along the outside of the center panel. Approx. 2" - 2.5" from the top of the shin, the blue stripes angle out from the center as they move toward the top edge.

• Armor has dimension giving the appearance of thickness and depth.
• Color is blue to match the collar armor, with an oval center detail in dark grey / metallic graphite to match the armor, partially outlined in off white to match the trident pattern on the helmet.
• Boot armor covers the top of the foot, hiding laces if present.
• Boot armor connects with no visible means of attachment.

• Black boots with silver soles and toe covering.
• Palladium boots Pampa Hi in black canvas are an example of an acceptable style (with the soles painted silver).

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Animated style pistols to fit into thigh holsters

• A hilt only may be carried on the back, in between the back plate and jetpack.
• If a saber blade is present it is made of black smoked acrylic with white details.

• Pre Vizsla may wear an Obi Wan Episode 3 saber hilt at his left hip.