Captain Keeli

Model CC 87078, Photo by Emily Durffee
Description: Captain Keeli
Prefix: CC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 3 - Episode 3

Commander Keeli serves in the Grand Army of the Republic at the rank of Captain. An experienced and dedicated soldier, Keeli often disregards personal safety in favor of doing what is necessary to help those in need of combat assistance and protection.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Phase I style helmet.
• Movie style helmets are not combined with animated armor.
• Base of helmet is painted matte or satin white.
• Narrow fin on top of dome.
• Rust colored details are painted as shown.
• For more photos, visit the Captain Keeli helmet detail page.
• Grey rangefinder present on right ear.
• Black eye lens extends down through the entire frown area.
• Raised bump at each ear, 1" - 1.25" in diameter.
• (4) vents on each side of helmet.
• Vents may be painted black or grey, or cut out and filled with black mesh.
• Primer grey indented helmet band on back of helmet.
• Raised white circle at the back center of helmet.
• Armor is weathered with shades of grey.

• Neck seal is black in color with no ribbing.
• No logos or labels are visible.

• Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

• Black base.
• 9 black panel sections are placed onto the base.
• Center line between the two front panels runs diagonal across the chest.
• On top of the three left shoulder panels is an additional layer of slightly smaller rust colored panels.
• Rear section of mantle is large enough to cover the majority of the back detail box of the armor.
• Base of pauldron is not weathered.
• Weathering of the panels consists of shades of grey.
• Weathering is concentrated along the edges.

• Armor is painted matte or satin white.
• Rust colored detailsare painted as shown.
• For more photos, visit the Captain Keeli shoulders detail page.
• Shoulders are padded so as not to rest flat against the arms.
• The top of the bell sits 3/4" - 1" above the natural shoulder.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Rust colored details are painted as shown.
• For more photos, visit the Captain Keeli bicep detail page.
• Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Rust colored details must be painted as shown.
• For more photos, visit the Captain Keeli forearms detail page.
• Left forearm has a compad with 4 main square recessed areas and 1 slightly smaller square recessed area.
• The smaller recess is closest to the elbow.
• Armor is seamless on the outside edge.
• Due to the shape of the armor, a butted seam is acceptable on the inside if required.
• Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
• Armor is weathered with shades of grey.

• Armor is painted a red rust color.
• Hand plates are mirror images of each other.
• Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
• Armor is weathered with shades of grey.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Armor is painted matte or satin white.
• Rust colored details are painted as shown.
• For more photos, visit the Captain Keeli chest and back detail page.
• Lower portion of the chest has a curved notch for the abdomen armor to fit into.
• Chest and back plate match together at the sides and shoulders with no open gap.
• Butted seam lines are permitted if required.
• Shoulder straps are placed over the chest and back armor at the seams.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Rust colored details are painted as shown.
• For more photos, visit the Captain Keeli chest and back detail page.
• Rear center of back armor has detailed area that contains a O11 pattern.
• Shoulder straps may be omitted from this costume due to the mantle/pauldron.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Top edge of the armor is curved to match the chest.
• Abdomen armor protrudes out int he middle to match the shape of the chest.
• Four inset lines divide the abdomen into segments.
• Abdomen and kidney armor connect at the sides with no open gap.
• A butted seam between the abdomen and kidney armor is acceptable.
• Armor is weathered in shades of grey.

• Armor is painted matte or satin white.
• Kidney and abdomen armor connect at the sides with no open gap.
• A butted seam between the kidney and abdomen armor is acceptable.
• Armor is weathered in shades of grey.

• Armor is painted matte or satin white.
• Belt is approx 3" tall and divided into 1.75" wide segments.
• The front segments have a key/slot detail.
• Belt boxes are mounted at the hips.
• Center upper area of codpiece is painted with a rust color.
• Cod and Posterior armor are connected at the hips.
• Butted seams are permitted at this connection if required.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx 3" tall and divided into 1.75" wide segments.
• Cod and Posterior armor connect at the hips.
• Butted seams are permitted at this connection if required.
• Detonator is centered on the back of belt.
• Detonator has no control buttons.
• The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
• Lines may be recessed or painted on.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Two rectangular boxes with one mounted on each side of belt.
• Top of boxe is tapered inward.
• There is an inset detail near the top of each box.
• Armor is weathered in shades of grey.

• The kama is made of black leather, leather like material, or heavy canvas.
• The kama has dark rust colored trim that matches the color of the armor details.
• The front edges of the kama line up with the outside edges of the front two segments of the belt.
• The back of the kama is split all the way up to the belt.

• Holsters are painted matte or satin white.
• Holsters are connected to belt straps under the belt boxes with visible bar or strap.
• Armor is weathered in shades of grey.

• Armor is painted matte or satin white.
• Rust colored details are painted as shown.
• For more photos, visit the Captain Keeli thighs detail page.
• Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
• From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Rust colored details are painted as shown.
• For more photos, visit the Captain Keeli shins detail page.
• Knee armor is integrated with the lower leg.
• The armor has a flat center triangle below the knee plate, with the single point facing downward.
• The calf detail of the armor has a ridge wrapping around the back of the leg.
• Due to the shape of the armor, a butted seam is permitted on the inside or back of the shin.
• Armor is weathered with shades of grey.

• Rust colored, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
• Boots are lace-less and have flat soles.
• Boots have a center strip running from the toe to the ankle.
• A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Manufactured by BlasTech Industries, DC-17 pistols are designed for use as secondary weapons. Because they are widely recognized for their high stopping power and firing rate, many battlefield officers use them as primarily combat weapons.
• This is the animated variant of the DC-17 blaster.
• The number of pistols carried is dependent on the number of holsters.

• Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.
• This is the animated variant of the DC-15S blaster rifle.

• Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.
• This is the animated variant of the DC-15A blaster rifle.