Clone Trooper Jesse (Phase I)

Model Jessica Linn TC-52414, Photo by none
Description: Clone Trooper Jesse (Phase I)
Prefix: TC
Detachment: Clone Trooper Detachment
Context: The Clone Wars, Season 2

A skilled Combat-Medic, CT-5507 or Jesse, serves in the Grand Army of the Republic as part of the 501st Legion under Captain Rex. Jesse was a hard-fighting patriot who proudly wore the cog-shaped symbol of the Galactic Republic on his helmet, and as a large tattoo that covered his face.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Phase I animated style helmet.
• Movie style helmets are not combined with animated armor.
• Helmet is painted matte or satin white with blue and grey/blue detail.
• Narrow fin on dome.
• Black eye lens extends down through the entire frown area.
• A blue band wraps around the lens area and down to the bottom of the chin.
• Around the visor and nose approx. 0.5 inch width.
• Where the chin section starts at the top approx. 1.5 inch width and angles down to approx. 0.75 inch width.
• Primer grey indented helmet band around back of dome.
• Republic Cog painted on front of helmet starts at the base of the fin, in the center of the cog.
• Cog is a grey/blue color that matches the shoulder armor
• Raised bump at each ear, 1" – 1.25" in diameter.
• (4) Vents on each side of helmet.
• Vents may be painted black or grey, or cut out and filled with black mesh.
• Rectangular indent at the back center of the helmet may be primer grey or heavily weathered white.
• Armor is weathered with shades of grey.
• Scuff marks on blue and grey/blue expose the underlaying white paint.

• Neck seal is black in color with no ribbing.
• No logos or labels are visible.

• Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

• Phase I animated style shoulder armor.
• Armor is painted matte or satin white with grey/blue detail.
• Armor is grey/blue with a white line going all the way around the outside.
• The white line is approx. 0.75 inch wide, measured from the edge.
• Shoulders are padded so as not to rest flat against the arms.
• The top of the bell sits 3/4" – 1" above the natural shoulder.
• Armor is weathered with shades of grey.
• Scuff marks on blue expose the underlaying white paint.

• Phase I animated style upper arm armor.
• Armor is painted matte or satin white.
• Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.

• Phase I animated Style Forearm and Elbow Armor.
• Armor is painted matte or satin white.
• Left forearm has compad with (4) main square recessed areas and (1) slightly smaller square recessed area.
• The smaller recess is closest to the elbow.
• Armor is seamless on the outside edge.
• Due to the shape of the armor, a butted seam is acceptable on the inside if required.
• Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
• Armor is weathered with shades of grey.

• Phase I animated style Hand plates.
• Armor is painted matte or satin white.
• Hand plates are mirror images of each other.
• Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
• The armor is weathered with shades of grey.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Phase I animated style Chest Armor.
• Armor is painted matte or satin white with blue detail.
• Armor has a blue stripe down the center.
• The stripe is approx. 1.75 inches wide.
• Lower portion of the chest has a curved notch for the abdomen armor to fit into.
• Chest and Back Armor match together at the sides and shoulders with no open gap.
• A seam line is present.
• Shoulder straps are placed over the chest and back armor at the seams.
• Armor is weathered with shades of grey.
• Scuff marks on blue expose the underlaying white paint.

• Phase I animated style Back Armor.
• Animated Phase I Back Armor.
• Armor is painted matte or satin white.
• Rear center of back armor has detailed area that contains a O11 pattern.
• Shoulder straps are placed over the Back and Chest armor at the seams.
• Armor is weathered with shades of grey.

• Phase I animated style Abdomen Armor.
• Animated Phase I Abdomen Armor.
• Armor is painted matte or satin white with blue detail.
• Top edge of the armor is curved to match the chest.
• Abdomen armor protrudes out in the middle to match the shape of the chest.
• At top of the protruvel a blue triangle lines up with stripe on chest armor.
• (4) inset lines divide the abdomen armor into segments.
• Abdomen and Kidney armor connect at the sides with no open gap.
• A butted seam between abdomen and kidney armor is acceptable.
• Armor is weathered with shades of grey.
• Scuff marks on blue expose the underlaying white paint.

• Phase I animated style Kidney Armor.
• Armor is painted matte or satin white.
• Kidney and abdomen armor connect at the sides with no open gap.
• A butted seam between the kidney and abdomen armor is acceptable.
• Armor is weathered with shades of grey.

• Phase I animated style Codpiece armor and Belt.
• Armor is painted matte or satin white.
• Belt is approx 3" tall and divided into 1.75" wide segments.
• The front segments have a key/slot detail.
• Belt boxes are mounted at the hips.
• Codpiece and Posterior armor connect at the hips.
• Butted seams are permitted at this connection if required.
• Armor is weathered with shades of grey.

• Phase I animated style Posterior Armor and Belt rear.
• Armor is painted matte or satin white.
• Belt is approx. 3" tall and divided into 1.75" wide segments.
• Posterior armor and Codpiece connect at the hips.
• Butted seams are permitted at this connection if required.
• Detonator is centered on the back of belt.
• Detonator has no control buttons.
• The detonator has (2) lines set in approx. 1/2" – 5/8" from the edges.
• Lines may be recessed or painted on.
• Armor is weathered with shades of grey.

• Phase I animated style Belt Boxes.
• Two rectangular boxes with one mounted on each side of belt.
• Boxes are painted matte or satin white and overlaid with bright orange.
• The top side of the box is tapered outward.
• There is an inset detail near the top of each box.
• Bright orange has scuff marks that expose underlying white.
• Armor is weathered with shades of grey.

• Phase I animated style Thigh Armor.
• Armor is painted matte or satin white.
• Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
• From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
• The upper outer edge has an angled section.
• Armor is weathered with shades of grey.

• Phase I animated style Lower Leg Armor.
• Armor is painted matte or satin white with blue detail.
• Knee armor is integrated with the lower leg.
• Front half of armor, under knee plate is painted blue with the back half coming down in a curve, angling in and coming back down to the bottom of the armor.
• The armor has a flat center triangle below the knee plate, with the single point facing downward.
• The calf detail of the armor has a ridge wrapping around the back of the leg.
• Due to the shape of the armor, a butted seam is permitted on the inside or back of the leg.
• Armor is weathered with shades of grey.
• Scuff marks on blue expose the underlaying white paint.

• Phase I animated style boots.
• White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
• Boots are lace-less and have flat soles.
• Boots have a center strip running from the toe to the ankle.
• A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.
• This is the animated variant of the DC-15S blaster rifle.

• Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.
• This is the animated variant of the DC-15A blaster rifle.