Clone Trooper Kix

Model TC 61813, Photo by EQ Meyer
Description: Clone Trooper Kix
Prefix: TC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Seasons 1–3

Kix serves as a trained medic with Torrent Company of the Grand Army of the Republic. Due to extreme dedication of the treatment of wounded soldiers, Kix has developed a freelance personality, often delivering orders in emergency medical situations, regardless of the higher ranked officers that may be present at the time.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Phase I style helmet.
• Movie style helmets are not combined with animated armor.
• Helmet is painted matte or satin white with “cornflower blue” detail.
• Narrow fin on dome.
• Black or dark smoke eye lens extends down through the entire frown area, and obscures the eyes of the wearer.
• A “cornflower blue” band wraps around the lens area to the top of the frown, around the visor and nose approx. 3/8 inch wide.
• Centered above the point of the visor at the top band are mirrored white rectangles, approx. 9/16 inch wide.
• “Cornflower blue” indented helmet band around the back of the dome.
• Lightning bolt detail mirrored on both sides of fin.
• Lightning bolt is white approx. 1cm wide, widening to 9/16 inch at the end of the second section, and 1/2 inch at the fin curve cutoff, with remainder of fin painted blue.
• Raied bump at each ear 1–1.25 inches in diameter.
• 4 Vents on each side of helmet.
• May be painted black or grey, or cut out and filled with black mesh.
• Raised white circle at the back center of the helmet.
• Rectangular indent at the back center of the helmet may be primer grey or heavily weathered white.
• “Cornflower blue” areas are weathered with scuff marks and fading.
• Scuff marks expose the underlying white paint.
• Armor is weathered with shades of grey.

• Neck seal is black in color with no ribbing.
• No logos or labels are visible.

• Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

• Armor is painted matte or satin white.
• Shoulders are padded so as not to rest flat against the arms.
• The top of the bell sits ¾ – 1 inch above the natural shoulder.
• Armor is weathered with shades of grey.

• Phase 1 animated style upper arm armor.
• Armor is painted matte or satin white with “cornflower blue” detail.
• “Cornflower blue” detail is mirrored on each bicep.
• The lower portion of the bicep is painted blue with a slanted curve design. The outward facing side of the bicep has the “cornflower blue” area starting at approx. 1 inch high from the bottom edge, curving upwards to the top inside edge of the bicep and plateauing approx. 1/2 inch wide before descending downward to complete the design.
• Armor as a notch on the lower area of the back of the arm that matches up with the below armor.
• Armor is seamless
• No visible traces of how the armor was assembled are shown.
• Scuff marks on the blue expose the underlying white paint.
• Armor is weathered with shades of grey.

• Phase 1 animated style forearm and elbow armor.
• Armor is painted matte or satin white with “cornflower blue” details.
• Left forearm has compad, painted white with recessed areas.
• (4) Main square recessed areas.
• (1) Slightly smaller square recessed area.
• The smaller recess is closest to the elbow.
• “Cornflower blue” sweeps upward from the bottom of the arm, beginning at approx. 1.5 inches from the wrist, to approx. 3 inches at the top.
• Armor is seamless on the outside edge.
• Due to the shape of the armor, a butted seam is acceptable on the inside if required.
• Elbow plate is integrated into the forearm, extending up to the fit into the notch on the bicep.
• “Cornflower blue” areas are weathered with scuff marks and fading.
• Scuff marks expose underlying white paint.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Hand plates are mirror images of each other.
• Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
• The armor is weathered with shades of grey.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Phase I animated style Chest Armor.
• Armor is painted matte or satin white with blue detail.
• Armor has symmetrical diamond-like design, painted “cornflower blue” , centered on chest.
• Mirrored stripes in white, approximately 3/8 inch wide, run vertically from the bottom of the chest curved notch to the collar, matching width of ab center section.
• White mirrored lightning bolt details are present at the curved notch, as a continuation of the ab notches.
• “Cornflower blue” section continues around to back under the arm cutout, matching references.
• Lower portion of the chest has a curved notch for the abdomen armor to fit into.
• Chest and Back Armor match together at the sides and shoulders with no open gap.
• A seam line is present.
• Shoulder straps are placed over the chest and back armor at the seams.
• Scuff marks on blue expose the underlying white paint.
• Armor is weathered with shades of grey.

• Phase I animated style Back Armor.
• Armor is painted matte or satin white with “cornflower blue” details.
• “Cornflower blue” is mirrored continuation of stripe from front, sweeping upwards to terminate in barb design at middle of back panel, matching references.
• Center section of back has 1 inch blue stripe to join the design on both sides
• Rear center of back armor has detailed area that contains a “O11” pattern.
• Shoulder straps are placed over the Back and Chest armor at the seams.
• Scuff marks on “cornflower blue” expose the underlying white paint.
• Armor is weathered with shades of grey.

• Phase I animated style Abdomen Armor.
• Armor is painted matte or satin white with “cornflower blue” detail.
• Top edge of the armor is curved to match the chest.
• Abdomen armor protrudes out in the middle to match the shape of the chest.
• Mirrored triangular designs are present on the innermost set of inset lines, as a continuation of the chest design.
• (4) inset lines divide the abdomen armor into segments.
• Abdomen and Kidney armor connect at the sides with no open gap.
• A butted seam between abdomen and kidney armor is acceptable.
• Scuff marks on “cornflower blue” expose the underlying white paint.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Kidney and abdomen armor connect at the sides with no open gap.
• A butted seam between the kidney and abdomen armor is acceptable.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx. 3" tall and divided into 1.75" wide segments.
• The front segments have a key/slot detail.
• Belt boxes are mounted at the hips.
• Codpiece and Posterior armor connect at the hips.
• Butted seams are permitted at this connection if required.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx. 3" tall and divided into 1.75" wide segments.
• Posterior armor and Codpiece connect at the hips.
• Butted seams are permitted at this connection if required.
• Detonator is centered on the back of belt.
• Detonator has no control buttons.
• The detonator has (2) lines set in approx 1⁄2" – 5⁄8" from the edges.
• Lines may be recessed or painted on.
• Armor is weathered with shades of grey.

• Two rectangular boxes with one mounted on each side of belt.
• Boxes are painted matte or satin white.
• The top side of the box is tapered outward.
• There is an inset detail near the top of each box.
• Armor is weathered with shades of grey.

• Phase I animated style Thigh Armor.
• Armor is seamless. No visible traces of how the armor was assembled are shown.
• Armor is painted matte or satin white with “cornflower blue” detail on right thigh.
• Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
• From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
• The upper outer edge has an angled section.
• Right thigh has an approx. 5.5–6 inches “cornflower blue” stripe beginning at the inside top edge at the middle and slanting downwards just over the notch at the knee. At the outside, the stripe narrows to approx. 4.5" and turns upwards after the median line, wrapping around the rear of the thigh to meet at the top edge of the inside. The stripe plateaus at the top edge, approx. 1–½" in width.
• Scuff marks on “cornflower blue” expose the underlying white paint.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Knee armor is integrated with the lower leg.
• The armor has a flat center triangle below the knee plate, with the single point facing downward.
• The calf detail of the armor has a ridge wrapping around the back of the leg.
• Due to the shape of the armor, a butted seam is permitted on the inside or back of the leg.
• Armor is weathered with shades of grey.

• White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
• Boots are laceless and have flat soles.
• Boots have a center strip running from the toe to the ankle.
• A strap across the top of the foot has two (2) flat white discs on either side of the foot, terminating the strap.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.
• This is the animated variant of the DC-15S blaster rifle.

Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.
This is the animated variant of the DC-15A blaster rifle.