Commander Fox - Phase I - Realistic

Model CC-28494, Photo by An-Sofie Blauwblomme
Description: Commander Fox — Phase I
Prefix: CC
Detachment: Clone Trooper Detachment
Context: Star Wars: The Clone Wars

Commander Fox leads the prestigious Coruscant Guard. The Coruscant Guard serves to protect the Republic’s capital of Coruscant and is distinguished by their armor’s red markings. Fox possess unwavering loyalty to the Galactic Republic and its leader, Supreme Chancellor Palpatine.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Phase I style clone helmet.
• The helmet is painted matte or satin white with maroon markings.
• Helmet fin on top of dome.
• The fin is painted maroon.
• Visor has a black eye lens.
• A maroon, command visor is present over the eye lens.
• A white flashlight is present on the left side of the visor.
• Helmet frown is charcoal black.
• Wire or plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
• The center of the chin is painted maroon.
• The vocoder detail in the center of the chin is white.
• The recessed face of the cheeks is painted maroon.
• A black antenna is present on the right ear of the helmet.
• The left ear cap is hemispherical.
• Six vents are present on each side of the helmet below the ear areas.
• Vents are painted maroon.
• Primer grey stripe around back of dome.
• A raised circular detail is present on the back of the helmet.
• The face of the circular detail is flat.
• The helmet is weathered with shades of grey and scuff marks.
• The maroon areas are weathered with scuff marks that expose the underlying white.

• Neck seal is black in color with vertical ribbing or smooth in appearance.
• No logos or labels are visible.
• If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.

• Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

• Armor is painted matte or satin white with maroon over top.
• Shoulders are tear drop in shape with all rounded edges.
• Armor is weathered with shades of grey and scuff marks that expose the underlying white.

• Armor is painted matte or satin white.
• There is a recessed area on the lower area of the back of the arm.
• The outside of the bicep has a hard line edge at the front that turns in.
• The inside of the upper arm is rounded.
• A maroon marking is present along the back of the bicep.
• Marking is an upside down “Y” shape and extends down the back of the bicep, along the top edge of the recessed area.
• Maroon detail does not extend to the bottom of the bicep.
• A maroon stripe is present on the outside of the bicep that follows the contour of the “Y” shaped maroon detail.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.
• Armor is weathered with shades of grey.
• Maroon areas are weathered with scuff marks that expose the underlying white.

• Realistic style elbow armor.
• Armor is painted matte or satin white.
• Elbow straps have a raised detail line at the top and bottom of the strap.
• Armor has two parallel dashed detail slots on each outside edge of elbow at the strap connection.
• Elbows are mirror images of each other with a notched area on the outside of the elbow above the detail marks.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white with maroon over top.
• Both left and right forearms are mirror images of each other.
• Right forearm has a white compad with eight small buttons, one large main button, and one slightly smaller rectangular button.
• Forearm tops have a flattened triangular area with a ridge that comes to a point at the top of the forearm.
• Armor is seamless.
• Armor is weathered with shades of grey.
• Maroon areas are weathered with scuff marks that expose the underlying white.

• Armor is painted matte or satin white with maroon over top.
• Hand plates are mirror images of each other.
• Hand plates have a top curving ridge that comes to a point over the index or middle finger, just past the main knuckle of the hand.
• Maroon areas are weathered with various scuff marks and fading.
• Scuff marks expose the underlying white paint.
• Armor is weathered with shades of grey.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Armor is painted matte or satin white with maroon details.
• Two detail slots are present on the right breast.
• Detail slots are white.
• A maroon Galactic Senate symbol matching visual references is present in the center of the chest plate.
• The horizontal “wings” of the Galactic Senate emblem sit underneath the breast and extend around the sides of the chest armor to the back plate.
• Chest and back armor match together at the sides with no open gap.
• A seam line is present under the arm.
• Shoulder straps are placed underneath the chest to connect to the back.
• Shoulder straps are maroon.
• Shoulder straps are slotted into the detail ridges of the top connection points.
• Armor is weathered with shades of grey.
• Maroon areas are weathered with scuff marks that expose the underlying white.

• Armor is painted matte or satin white.
• Rear center plate has detailed area that contains four circles, two parallel lines in the bottom left, and a rectangular vent detail in the bottom right.
• Back and chest armor match together at the sides with no open gap.
• A seam line is present under the arm.
• The maroon stripes present on the sides of the chest plate extend onto the back plate.
• Shoulder straps are placed underneath the back to connect to the chest.
• Shoulder straps are maroon.
• Shoulder straps are slotted into the detail ridges of the top connection points.
• Armor is weathered with shades of grey.
• Maroon areas are weathered with scuff marks that expose the underlying white.

• Armor is painted matte or satin white.
• Two inset lines divide the abdomen armor into segments.
• Four holes, approximately ¼" in diameter, are present in each inset line.
• Three tapered, maroon pinstripes are present in the center of the abdomen armor.
• Pinstripes align with the Galactic Senate emblem on the chest armor.
• Abdomen armor wraps around the wearer’s body and is sealed at the sides or back.
• Abdomen armor is completely contained under the chest and back armor.
• Armor is seamless at the sides and closes in the back.
• A raised, armor plate covers the seam line and hides all work.
• Armor is weathered with shades of grey.
• Maroon areas are weathered with scuff marks that expose the underlying white.

• Armor is painted matte or satin white.
• Codpiece and Posterior armor connect at the hips.
• Armor is weathered with shades of grey.

• Realistic style clone belt, belt boxes, and detonator.
• Belt, boxes, and detonator are painted matte or satin white with maroon over top.
• Belt front between front boxes has three vertical rectangle indents which are spaced apart by two protruding rectangle areas.
• The rest of the belt is flat surfaced with raised edging on the top and bottom that run along the rest of the belt.
• Eight belt boxes are attached to the belt with four on each side.
• The two largest boxes are in front with an angled top surface that is higher toward the center.
• The smallest boxes are located behind the front boxes, about 1⁄8" apart and have an angled end on top.
• The medium sized matching boxes, with flat top cover are about 1⁄8" from the smallest boxes.
• Left rear box is spaced closer to the detonator and has two square buttons in the top left corner, and two dashed indented detail marks on bottom right.
• Right rear box is spaced closer to the detonator and has a bar with two small cylinders centered and two dashed indented detail marks on the bottom left.
• A detonator is centered and attached to the back of the belt.
• Detonator tube is about 2.25" diameter with wider detailed end caps.
• Seven (7) horizontally aligned square buttons are on the left side of the tube when viewed from behind.
• Armor has little to no weathering.
• Armor is weathered with shades of grey.
• Maroon areas are weathered with scuff marks that expose the underlying white.

• Realistic style two panel kama, separated on back.
• Kama is made of matte pleather/vinyl type material.
• Kama is black with red trim that is lighter color than the maroon on armor
• Trim is fabric with visible texture
• Bottom corners of the kama are rounded.
• Front edges of the kama line up with the inside edges of the front boxes.
• Back of the kama, the panels are separated by approx. 4 inches and connect under the belt.

• Armor is painted matte or satin white.
• Front of thigh armor has a flat triangular area near the knee.
• From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
• Rear of the thigh has an indention.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.
• Outside of lower edge comes to a point.
• Inner lower edge is rounded.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Knees wrap around the front of the leg.
• From top center a vertical raised detail line is present.
• Knees are strapped to the leg via a white strap with a raised center area that wraps around the leg and connects on both sides of the knee.
• Connection between the knee and the strapping has a detailed clip.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white with maroon over top.
• Lower legs are mirror images of each other.
• The lower leg armor is maroon aside from a white stripe on the front of the calf.
• The ”Y” detail splits and wraps around the back of the calf and connects in the back.
• The front of the armor has a triangular detail at the top of the leg and a hard ridge line down the front of the shin.
• Back of lower leg armor features arched indentation, just under the calf, that follows down to the ankle.
• Bottom of this indentation features a smaller arch detail at the heel.
• Outside of the calf is closed.
• Calf can have an access area on the inside of the leg.
• Calves are seamless and have a trap door access through the indent in the rear of the lower leg.
• Outside of the lower leg has a pointed tip at the top.
• Inside of the lower leg is rounded at the top.
• Armor is weathered with shades of grey.
• Maroon areas are weathered with scuff marks that expose the underlying white.

• Maroon ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle, boots.
• Boots are lace-less.
• The boots have armor detail to include a natural seam at the toe and a strap that goes over the top of the foot with two protruding disks at each side of the strap.
• There are no markings or labels from the shoe makers.
• Boot soles are flat.
• The sole of the boots are grey.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Realistic Clone Style DC-15S Blaster.
• Blaster may be scratch built out of plastic, wood, metal or cast in resin.
• Blaster has realistic Episode II or Episode III details:
• Wire frame sight.
• Folding stock.
• Twelve radiator fins evenly spaced along the length of barrel.
• Igniter detail knobs.
• Charge magazine clip on right side.
• Total length is approximately 26 inches (66 cm).
• Because of the scale, the Hasbro version is incorrect.

• Realistic Clone Style DC-15A Blaster Rifle.
• Blaster rifle is scratch built out of plastic, wood, metal or cast in resin.
• Blaster has realistic Episode II or Episode III details:
• Flip up sight in down position.
• Ten radiator fins are evenly spaced along the length of the barrel.
• Power setting adjuster detail lever.
• Sniper Scope attached under rifle in storage position.
• Charge magazine clip on left side.
• Igniter detail knobs.
• Total length is approximately 55 inches (139.7 cm).
• Because of the scale, the Hasbro version is not allowed.