Coruscant Guard

Model TC 8916, Photo by Michael H.
Description: Coruscant Guard
Prefix: TC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Seasons 1-3

The prestigious Coruscant Guard is a specialized division of the Grand Army of the Republic stationed on the capital planet of Coruscant. The Coruscant Guard is responsible for guarding and protecting vital infrastructure and government buildings as well as providing escort duty for Galactic Senate members and other dignitaries on diplomatic missions.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Animated Phase I style helmet.
• Movie style helmets are not combined with animated armor.
• Helmet is painted matte or satin white with dark scarlet detail.
• Narrow fin on dome.
• A dark scarlet line, about 1 inch wide, wraps around the entire dome just above brow band.
• Two dark scarlet diamonds are aligned vertically and centered on the front of the helmet.
• Upper dark scarlet diamond is centered above the brow band between the scarlet line and front starting edge of fin. Bottom point is part of the scarlet line.
• Lower dark scarlet diamond is centered below the frown and continues down to align with chin opening. Bottom point is not visible due to chin opening.
• A black eye lens extends down through the entire frown area.
• (4) Vents on each side of helmet.
• Vent indents may be painted black or grey, or cut out and filled with black mesh.
• A grey indented helmet band runs around back of dome.
• Raised white circle at the back center of the helmet.
• Scuff marks on dark scarlet expose underlying white.
• Armor is weathered with shades of grey.

• Neck seal is black in color with no ribbing.
• No logos or labels are visible.

• Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

• Animated Phase I Shoulder Armor.
• Armor is painted matte or satin white with dark scarlet detail.
• Armor has dark scarlet border that rings around the shoulder edges.
• Dark scarlet bottom edge is about 2 inches wide.
• Dark scarlet side and top edge is about 1 inch wide.
• Scuff marks on dark scarlet expose underlying white.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
• Painted on the back of the arm, there is a dark scarlet upside-down "Y" shape which tapers to point on each side of the armor.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.
• Armor is weathered with shades of grey.

• Animated Phase I Forearm Armor.
• Armor is painted matte or satin white with dark scarlet detail.
• Lower portion of elbow section is dark scarlet and forms an upward pointed arrow that comes to a peak at the center of the elbow.
• Left forearm has a compad with (4) main square recessed areas and (1) slightly smaller square recessed area.
• The smaller recess is closest to the elbow.
• Armor is seamless on the outside edge.
• Due to the shape of the armor, a butted seam is acceptable on the inside if required.
• Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
• Armor is weathered with shades of grey.
• Scuff marks on dark scarlet expose underlying white.

• Armor is painted matte or satin white.
• Hand plates are mirror images of each other.
• Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
• Armor is weathered with shades of grey.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Animated Phase I Chest Armor.
• Armor is painted matte or satin white with dark scarlet detail.
• Dark scarlet detail is centered on the lower portion of the chest.
• Center detail between raised chest and curved notch forms the Symbol of the Galactic Senate with detail pattern lines that extend to sides.
• Lines on sides parallel below raised chest, then expand and flare outward along sides.
• Lower portion of the chest has a curved notch for the abdomen armor to fit into.
• Chest and back plate match together at the sides and shoulders with no open gap.
• Butted seam lines are permitted if required.
• Shoulder straps are placed over the chest and back armor at the seams.
• Shoulder straps are painted matte or satin white.
• Scuff marks on dark scarlet expose underlying white.
• Armor is weathered with shades of grey.

• Animated Phase I Back Armor.
• Armor is painted matte or satin white with dark scarlet detail.
• Dark scarlet stripe continues from chest sides and extends back in about 2 inch wide stripe and ends at sides of back box.
• Back box detail area contains a O11 pattern.
• Shoulder straps are placed over the chest and back armor at the seams.
• Shoulder straps are painted matte or satin white.
• Armor is weathered with shades of grey.
• Scuff marks on dark scarlet expose underlying white.

• Animated Phase I Abdomen Armor.
• Armor is painted matte or satin white with dark scarlet detail.
• Dark scarlet aligns with chest detail and forms a vertical stripe that narrows toward the bottom.
• Armor is weathered with shades of grey.
• Scuff marks on dark scarlet expose underlying white.

• Armor is painted matte or satin white.
• Kidney and abdomen armor connect at the sides with no open gap.
• A butted seam between the kidney and abdomen armor is acceptable.
• Armor is weathered with shades of grey.

• Animated Phase I Codpiece and Belt.
• Armor is painted matte or satin white with dark scarlet belt boxes.
• Belt is approx 3" tall and divided into 1.75" wide segments.
• Front belt segments have a key/slot detail.
• A dark scarlet belt box is mounted on each side of belt.
• Cod and Posterior armor are connected at the hips.
• Butted seams are permitted at this connection if required.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx 3" tall and divided into 1.75" wide segments.
• Codpiece and Posterior armor connect at the hips.
• Butted seams are permitted at this connection if required.
• Detonator is centered on the back of belt.
• Detonator has no control buttons.
• The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
• Lines may be recessed or painted on.
• Scuff marks on dark scarlet expose underlying white.
• Armor is weathered with shades of grey.

• Animated Phase I Belt Boxes.
• Belt boxes are matte or satin white with dark scarlet overlaid over entire box.
• Two rectangular boxes are mounted to belt with one on each side.
• There is an inset upside down “U” detail near the top of each box.
• Scuff marks on dark scarlet expose underlying white.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
• From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
• The upper outer edge has an angled section.
• Armor is weathered with shades of grey.

• Animated Phase I Lower Leg Armor.
• Armor is painted matte or satin white with dark scarlet detail.
• Shin area has a dark scarlet “Y” pattern in front that creates a complete loop around the back calf.
• Front of “Y” narrows as it extends down the front ridge of lower leg.
• At the bottom of the “Y” pattern, a small perpendicular stripe forms the base edge of pattern.
• Knee armor is integrated with the lower leg.
• An inverted dark scarlet triangle extends the full length of front flat surface of the knee.
• The armor has a flat center triangle below the knee plate.
• The calf detail of the armor has a ridge wrapping around the back of the leg.
• Due to the shape of the armor, a butted seam is permitted on the inside or back of the leg.
• Scuff marks on dark scarlet expose underlying white.
• Armor is weathered with shades of grey.

• White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
• Boots are laceless and have flat soles.
• Boots have a center strip running from the toe to the ankle.
• A strap across the top of the foot has two (2) flat white discs on either side of the foot, terminating the strap.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• This is the animated variant of the DC-15S blaster rifle.

• This is the animated variant of the DC-15A blaster rifle.