Doom Grunt (Phase II)

Model CT-13502, Photo by Jeremy Pastros
Description: Clone Trooper Doom Grunt (Phase II)
Prefix: CT
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 4

Doom's company serves in the Grand Army of the Republic under Generals Tiplar and Tiplee. They have experienced many battles, as evidenced by the heavily weathered armor.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Phase II animated style helmet.
• Movie style helmets are not combined with animated armor.
• Armor is painted matte or satin white.
• A Green stripe is painted on the right side of the mohawk extending from the Visor to the backstrap.
• The “V” on the back of the helmet is painted green, leaving the circle and center rectangle details white.
• Mohawk on top of dome is painted white.
• Faceplate and cheek indents of the helmet are painted green.
• The frown has (6) removed teeth spaces.
• Black colored plastic mesh is utilized inside the helmet to cover the open pieces of the frown.
• Ear caps are dark grey.
• (6) vents on each side of helmet.
• Vents may be painted black or grey, or cut out and filled with black mesh.
• Armor is weathered with shades of grey.

• Neck seal is black in color with no ribbing.
• No logos or labels are visible.

• Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

• Armor is painted matte or satin Green.
• A 2" section at the top of the shoulders is painted white and follows the curve of the shoulder.
• Shoulders have all rounded edges.
• Shoulder armor is not symmetrical.
• The shoulders slightly curve back at the bottom.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin green.
• Armor is cylindrical with no rear indent.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin Green.
• Right forearm has a compad with (6) raised buttons, with a larger rectangle above them.
• A smaller raised section is closest to the elbow.
• Armor is seamless on the outside edge.
• Due to the shape of the armor, a butted seam is acceptable on the inside if required.

• Armor is painted matte or satin Green.
• Hand plates are mirror images of each other.
• Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
• Armor is weathered with shades of grey.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Armor is painted matte or satin white.
• A Green stripe “U” is painted on the front of the chest going back towards the back of the armor.
• A yellow inverted triangle detail is present at the center of the chest.
• Lower portion of the chest has a squared notch for the abdomen armor to fit into.
• Chest and back plate match together at the sides and shoulders with no open gap.
• A seam line is present.
• Shoulder straps fit into the top of the chest and back.
• Shoulder straps are painted green.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Top section of back armor has Green area extending down to the detail plate — as shown.
• Inside of detail plate is white.
• Back armor has a detail plate consisting of (4) circles and (5) horizontal bars.
• Back and Chest armor match together at the sides with no open gap.
• A seam line is present.
• Shoulder straps are painted green.
• Shoulder straps fit into the top of the back and chest.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Top edge of the armor is squared off to match the chest armor.
• The abdomen armor protrudes out in the middle to match the shape of the chest armor.
• The abdomen armor joins at the rear and the join is covered by a center plate.
• Armor is Heavily weathered with shades of grey.

• Armor is painted matte or satin white.
• Kidney and abdomen armor connect at the sides with no open gap.
• A butted seam between the kidney and abdomen armor is acceptable.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx 3" tall and divided into 1.75" wide segments.
• Belt is painted brown
• The front segments have a key/slot detail.
• Belt boxes are mounted at the hips.
• Belt Boxes are painted brown to match the belt
• Codpiece and Posterior armor connect at the hips.
• Butted seams are permitted at this connection if required.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx 3” tall and divided into segments.
• Belt is painted brown.
• Cod and posterior armor is connected at the hips.
• Butted seams are permitted at this connection if required.
• Detonator is centered on the back of the belt with no control buttons.
• Detonator has 2 lines set in approx ½" – ⅝" from the edges.
• Detonator is painted brown to match the belt.
• Armor is weathered with shades of grey.

• Two rectangular boxes with one mounted on each side of belt.
• Boxes are painted matte or satin brown.
• The top side of the box is tapered outward.
• There is an inset detail near the top of each box.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
• From the top of the triangle a ridge line travels up the thight to the top edge.
• The upper outer edge has an angled section.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin green.
• Knee armor is integrated with the lower leg.
• The front of the armor has a triangular detail just below the knee and a hard ridge line down the front of the shin.
• Back of the lower legs have an indentation just under the calf that extends down to the ankle.
• The outside of the calf is seamless.
• A clam shell opening on the inner seam is acceptable.
• Armor is weathered with shades of grey.

• Green, Ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
• Boots are lace-less and have flat soles.
• Boots have a center strip running from the toe to the ankle.
• A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• This is the animated variant of the DC-15S blaster rifle.

• This is the animated variant of the DC-15A blaster rifle.