Republic Commando: Captain Gregor

Model Aaron Combs, Photo by none
Description: Republic Commando: Captain Gregor
Prefix: RC
Detachment: Clone Trooper Detachment
Context: Star Wars: Clone Wars Season 5

CPT Gregor had lost his memory and was discovered washing dishes on a remote planet. He was reminded of his past and was recruited to conduct a high risk solo infiltration into Separatist controlled territory. While his mission was a success, his fate remains unknown…...

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Animated Katarn-Class Commando Armor Helmet
• Helmet base color is matte white
• 2 tone grey (dark grey, light grey) digital camouflage covers the helmet
• Honey Yellow “M” shape surrounds the T-visor opening and brow
• Black tally marks adorn the face and forehead
• Blue Mirrored Visor. May also use black visor as long as blue illuminated glow reflects from visor lighting
• Ear circles painted grey
• Spotlight holder on left ear circle, no actual light installed
• Wide blue EL tape or other lighting technique that provides a solid blue strip across the top of the T-visor extended down approximately halfway down the height of the horizontal portion of the “T”
• Two front aerators painted black with simple circular aerators
• Chin communication port is painted black without any greebie piece
• Frown below T-visor is painted flat black
• Back of helmet is smooth without vertical vents or horizontal bands
• No side check vents
• All paint is worn, faded and weathered

• Neck Seal is made of black vinyl or leather type material.
• Smooth, stiff, padded collar
• Bib comes over the top of the collar
• Bib covers the entire head/neck opening of the armor
• 10 raised 3-dimensional trapezoids approximately 5mm tall, extend from the collar down under the edges of the chest and back

• Animated Katarn-Class Commando shoulder bells are rounded to cover the area from the shoulder strap to midway down the bicep
• Shoulder bells are matte white
• 2 tone grey (dark grey, light grey) digital camouflage covers the shoulder bells
• The right shoulder bell will be solid honey-yellow over the digital camouflage (hints of the digital pattern underneath can be seen)
• The left shoulder bell will have a honey-yellow stripe extending the long axis of the bell wide enough to cover the center “H” portion
• All paint is worn, faded and weathered

• Animated Katarn-Class Commando biceps must be constructed without a visible seam
• Biceps are flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the biceps
• Biceps have a recessed downward pointing wedge shape on the outside
• Biceps have 2 prongs extending from the lower outside edge
• Black and gold unit designation emblem is displayed in the outside center of both biceps
• All paint is worn, faded and weathered

• Animated Katarn-Class Commando forearms must be constructed without a visible seam
• Forearms are flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the forearms
• The forward 1/3 of the forearm is painted honey-yellow angling slightly farther to the elbow on the top edge
• A second thin stip of honey yellow follows the same angle as the forward section approximately 1” away. The strip is approximately ¼” wide
• A raised ridge runs along the top of the forearm from the wrist seam to the back edge
• The raised edge will be arrow shaped when seen from the side
• The raised edge will be painted honey-yellow
• The “elbow” is connected to the forearm and will be centered on the raised edge
• All paint is worn, faded and weathered

• Black gauntlet length gloves made of leather, nylon, or other low pile fabrics.
• Gloves have imbedded armor padding along fingers and back of hand.
• Gloves do not show any labels or logos once armor is attached.

• Animated Katarn-Class Commando hand plates have a raised edge along the break between the thumb and forefinger
• 2 tone grey (dark grey, light grey) digital camouflage covers the hand plates
• Honey-yellow paint covers the grey camo so that the camo can just be barely be seen
• All paint is worn, faded and weathered

• Animated Katarn-Class Commando chest has a “V” shape front with elevated chest area
• Chest and back must join with an unnoticeable smooth seam
• Chest is flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the chest
• Honey-yellow paint covers the right pectoral, horizontally across the middle “V”, then follows the “V” shape up across the shoulder strap to the back
• Black and honey-yellow unit designation emblem is displayed on the left pectoral
• All paint is worn, faded and weathered

• Animated Katarn-class Commando back has a raised center section that lines up with the backpack and a depressed arch below the pack area on the lower back
• Back is flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the back
• Honey-yellow paint follows the lines from the left shoulder strap to create a diagonal line from left shoulder down to right ribs, area above and to the right is filled in honey-yellow
• All paint is worn faded and weathered

• Animated Katarn-class Commando backpack has a light panel in the left center portion and two lower pack handles and construction will have no visible seams
• Backpack is flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the backpack
• Dark grey paint covers the lower “boxes” and handles
• Light panel has 1 large blue rectangle on the upper left, 2 smaller blue rectangles stacked vertically to the right of the big blue rectangle, 1 small blue square under the smaller rectangles, and 1 red square under the big blue rectangle
• Light panel will be backlit to provide illumination to the blue and red shapes
• Mounting hardware must not be visible when worn
• All paint is worn, faded and weathered

• Animated Katarn-class Commando abdomen is a solid cod and ab piece with surface 3-D details
• Abdomen will connect to back/posterior plate with an unnoticeable smooth seam
• Abdomen is flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the abdomen
• All paint is worn, faded and weathered

• Animated Katarn-class Commando posterior is a solid butt and back piece that matches height with the abdomen
• Posterior is flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the posterior
• All paint is worn, faded and weathered

• Animated Katarn-class Commando thighs have a long inverted “Y” shape along the front edge and scooped out depressions along the back side, construction will have no visible seam
• Thigh is flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the thighs
• All paint is worn, faded and weathered

• Animated Katarn-class Commando calves has a flat shin with a horizontal scooped indention at the front of the ankle, a depressed spoon shape in the back, construction will be without visible seam
• Knee plate attaches to, and extends above the top of the shin (knee plate may be removable)
• Knee is ovular and has raised lines across the center, creating a 3-D angled appearance
• Spats will follow shape of bottom of calf and extend just below the calf
• Calves, Knees and Spats are flat white base color
• 2 tone grey (dark grey, light grey) digital camouflage covers the calves, knees and spats
• All paint is worn, faded and weathered

• Animated Katarn-class Commando boots are low profile flat soled with a square toe and wide strip going from front of sole to the top of the tongue
• Boots will be tall enough to fit into spats
• Boot base color is flat white
• 2 tone grey (dark grey, light grey) digital camouflage covers the boots
• All paint will be worn, faded and weathered

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Animated base weapon has streamlined design consisted of less detail than the video game versions. Containing the following:
• Enclosed Trigger guard
• Lowered forward grip
• Front sight posts
• Left side magazine well
• Short magazine
• Painted a tactical flat black or gun metal