Sergeant Neyo (Phase II)

Model Sergeant Neyo, Photo by PHOTOGRAPHER NAME
Description: Sergeant Neyo (Phase II)
Prefix: CC
Detachment: Clone Trooper Detachment
Context: The Clone Wars: Season 5

Neyo, serves in the Grand Army of the Republic as a commander of the 91st Reconnaissance Corps. During a speeder patrol on Saleucami with General Stass Allie, Neyo received "Contingency Order 66" from Supreme Chancellor Palpatine. Obeying this directive without question, Neyo and the 91st carried out their order to eliminate the former Jedi and Republic General.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Modified Phase II Helmet.
• Helmet differs from the "realistic" version of Neyo. Most notably in the front vent tube area.
• Helmet mohawk on top of dome.
• Red, 91st Reconnaissance Corps symbol is painted on the right side of the front dome.
• Black eye lens.
• Helmet frown is painted grey with (7) removed teeth sections.
• Removed teeth sections are backed with black mesh.
• Indented cheek areas are painted primer grey.
• Small aerators are mounted on front side wall of indented cheeks and point backwards.
• (6) vents on each lower side of helmet.
• Vents may be painted black or grey, or cut out and filled with black mesh.
• Ear caps are painted primer grey.
• Primer grey indented helmet band around back of helmet.
• The red areas are weathered with various scratches and fading.
• The white areas are weathered with shades of grey.

• Neck seal is black in color with no ribbing.
• No logos or labels are visible.

• Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

• Armor is painted matte or satin white.
• Left shoulder is painted red with white trim border.
• Shoulders have all rounded edges.
• Shoulder armor is not symmetrical.
• The shoulders slightly curve back at the bottom.
• The red areas are weathered with various scratches and fading.
• The white areas are weathered with shades of grey.

• Armor is painted matte or satin white.
• Painted on the right upper arm is a 91st Reconnaissance Corps symbol.
• Armor is cylindrical with no rear indent.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.
• The red areas are weathered with various scratches and fading.
• The white areas are weathered with shades of grey.

• Animated style Phase II Forearm and Elbow Armor.
• Armor is painted matte or satin white.
• The elbow has a straight edge along the top and a lower extension that fits into the cut-out area of the forearm armor.
• Right forearm has a compad with (6) small buttons, (1) large main button, and (1) slightly small rectangular button.
• The 2 buttons closest to the wrist are a yellow-green color.
• The 2 buttons just above those are white on (L) and red on the (R).
• Remaining buttons are white.
• The dash across the large main button is colored blue.
• Armor is seamless on the outside edge.
• Due to the shape of the armor, a butted seam is acceptable on the inside if required.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Hand plates are mirror images of each other.
• Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
• Armor is weathered with shades of grey.

• Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
• Gloves cover any exposed skin.
• Gloves do not show any labels or logos when the armor is worn.

• Armor is painted matte or satin white.
• The upper most section of the chest armor (shoulder and collar area) is painted primer grey.
• The lower edge of this grey area is formed into angled arch.
• Shoulder straps are placed over the chest and back armor at the seams.
• Shoulder straps are white.
• Chest and back plate match together at the sides with no open gap.
• A butted seam line is present.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Attached to the top of the rear box section is a white thermal detonator.
• This detonator has wide diameter and smooth end-caps which are painted the same leather brown color as the right side outer shoulder protector.
• The top and sides of the rear box section is painted primer grey.
• On the sides of the box, closest to the back armor, this grey color stops short of the bottom, then angles downward as it reaches the lower outside face of the box.
• Back armor box has a detail plate consisting of (4) circles and (5) horizontal bars.
• The raised outline, of the face plate area, is painted primer grey.
• The face plate itself remains white.
• Chest and back armor match together at the sides with no open gap.
• A butted seam line is present.
• Armor is weathered with shades of grey.

• Multi-sectional, shoulder harness with attached shoulder protector.
• There is a leather, or leather like protector over the top of the right shoulder armor.
• This protector attaches to a shoulder harness over the right shoulder strap.
• The top section of this harness strap is also made of leather or a leather like material, similar to the shoulder protector itself.
• The lower portion of the harness consists of two grey belts.
• One belt drapes under the right arm and the other crosses the chest to the left side.
• Both of these belts pass between the armored waist belt and thigh boxes.
• The different sections of the harness are connected together with several silver colored tri-glide buckles.

• Animated Phase I Abdomen Armor.
• Armor is painted matte or satin white.
• Top edge of the armor is curved to match the chest.
• Abdomen armor protrudes out in the middle to match the shape of the chest.
• (4) inset lines divide the abdomen armor into segments.
• Abdomen and Kidney armor connect at the sides with no open gap.
• A butted seam between abdomen and kidney armor is acceptable.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Kidney and abdomen armor connect at the sides with no open gap.
• A butted seam between the kidney and abdomen armor is acceptable.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx. 3" tall and divided into 1.75" wide segments.
• The front segments have a key/slot detail.
• Belt boxes are mounted at the hips.
• Codpiece and Posterior armor connect at the hips.
• Butted seams are permitted at this connection if required.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Belt is approx 3" tall and divided into segments.
• Cod and Posterior armor connect at the hips.
• Butted seams are permitted at this connection if required.
• Detonator is centered on the back of belt with no control buttons.
• The detonator has 2 lines set in approx 1/2" - 5/8" from the edges.
• Lines may be recessed or painted on.
• Armor is weathered with shades of grey.

• Two rectangular boxes with one mounted on each side of belt.
• Boxes are painted matte or satin white.
• The top side of the box is tapered outward.
• There is an inset detail near the top of each box.
• Armor is weathered with shades of grey.

• Armor is painted matte or satin white.
• Right thigh only is painted with a 91st Reconnaissance Corps symbol.
• Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
• From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
• Lower rear of the thighs have an an arched indented section.
• Armor is seamless.
• No visible traces of how the armor was assembled are shown.
• Weathering of red areas includes various scuff marks and fading.
• Weathering of white areas are shades of grey.

• Armor is painted matte or satin white.
• The front of the armor has a triangular detail just below the knee and a hard ridge line down the front of the shin.
• Back of the lower legs have an indentation just under the calf that extends down to the ankle.
• The outside of the calf is seamless.
• A clam shell opening on the inner seam is acceptable.
• Armor is weathered with shades of grey.

• White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
• Boots are laceless and have flat soles.
• Boots have a center strip running from the toe to the ankle.
• A strap across the top of the foot has two (2) flat white discs on either side of the foot, terminating the strap.

• OPTIONAL Level two certification (if applicable):

  • Boots have accurate notched sole.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• This is the animated variant of the DC-15S blaster rifle.

• This is the animated variant of the DC-15A blaster rifle.