Captain Enoch - Ahsoka

Model TK-22504
Description: Captain Enoch, Ahsoka
Prefix: TK
Detachment: First Imperial Stormtrooper Detachment
Context: Star Wars: Ahsoka

This is Enoch, captain of my guard. — Grand Admiral Thrawn

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• All costume elements are painted and weathered to match the specific visual references for this costume.
• All damage must be 100% screen accurate if individual wishes to obtain EIB (Level 2) approval from Detachment.
• Cracks may be painted on surface in metallic gold paint.

• Helmet is based on the Rogue One/Anthology style stormtrooper helmet.
• The face plate is gold in color; remainder per references.
  • Vocoder (vertically ribbed chin detail) is painted black.
  • Lenses are black or grey in color.
  • Lenses sufficiently dark enough to obscure the costumer's eyes.
• There are two cheek tubes that extend from the ears.
  • Two vent greeblies are present in the end of each cheek tube at the bottom front of the helmet.
• Trapezoids on dome and tears on the cheeks of helmets are grey.
• Rear traps and tears have vertical black lines.
• There are 2 red imperial cogs on the front dome of the helmet.
  • The cogs are positioned symmetrically, one on each side.
  • The cogs have light weathering.
  • The cogs are rotated as per references.
• Light to medium weathering as per references.
• Cracking as per references.
• Gray and gold color patches as per references.
• Note: The helmet is accurate in detail and proportion to official references.

• Black with horizontal ribs, fitted to the wearer, and extending from the base of the neck to conceal the entire neck.

• Dark Burgundy, non-textured material, either one-piece or two-piece construction with no visible zippers or logos/designs.

• They may be affixed with Velcro or adhesive.
• Light to medium weathering as per references.

• One on each shoulder.
• The shoulders are considered effectively symmetrical; but are not interchangeable.
• Left shoulder must be gold colored.
• Right shoulder must have 1 gold colored area per references.
• Light to medium weathering as per references.
• Cracking as per references.

• The front strip is beveled and approximately 1/8" (3mm) thick that does not extend beyond the bicep, and has a smaller cover strip layered thereon.
• Light to medium weathering as per references.
• Cracking as per references.
• Left side is approximately 3/4 grey as per references.
• Right side has 1 grey area that wraps the part as per references.

• The front strip is beveled and approximately 1/8" (3mm) thick that does not extend beyond the bicep, and has a smaller cover strip layered thereon.
• Light to medium weathering as per references.
• Cracking as per references.

• Roughly pentagonal in shape, the hand plates are mounted securely over the back of the glove. As an alternative to plastic, these may be made out of latex or latex-like material.
• Light to medium weathering as per references.
• Cracking as per references.
• Left hand plate is gold colored.

• Dark Burgundy or Maroon, leather or leather-like, enclosed fingered, non-textured, (normal leather grain/texture/lines are acceptable) fitted style.
• No buckles, straps, or decorative stitching.

• Chest plate overlaps the abdominal plate.
• Light to medium weathering as per references.
• Cracking as per references.
• Right side must have 1 gold colored area per references.

• There are raised trapezoids at the top of the backplate section beneath which the shoulder straps insert.
• The backplate continues past these trapezoids towards the top of the shoulder
• Right side
  • There is a black square shaped greeblie with a circular gold recess detail
• Left Side
  • There is a rectangular raised section.
  • There is a black colored rectangular frame.
  • There is a gray section on the left.
  • There are 2 raised vertical bars that are gold in color.
• Lower section
  • There is a black square greeblie below the right greeblie.
  • There is a small vertical rectangle to the right of the black square greeblie.
  • There is a small rectangular greeblie with rounded ends below the right side black greeblie.
• Light to medium weathering as per references.
• Cracking as per references.
• There is a gold colored section along the bottom of the armor as per references.

• The abdominal armor consists of a one-piece corset design with a vertical opening centered on the back.
• The back opening is covered by a rectangular cover plate that is worn under the back armor.
• There are 3 vertical ribs centered on the front of the abdomen and two (one left and one right) ribs further spaced to each side of the center.
• There are two (one left and one right) angled (approximately 70 degrees) ribs on each side of the abdominal armor.
• There are two (one left and one right) angled (approximately 70 degrees) recessed ribs on each side of the abdominal armor behind the raised angled ribs that are black
• The center front detail consists of a raised rectangular panel. On the right half of the panel, there is a vertical column of 4 buttons approximately 7/16" (11mm) in diameter. The bottom button is blue while the other three are grey. On the left half of the panel, there is a vertical column of raised evenly spaced horizontal gear teeth with a recessed trapezoid at the top of the column. The rectangular inside bottom of the trapezoid is black.
• The left front detail consists of a raised rectangular panel with an angled top. There is a vertical column of 4 buttons approximately 7/16" (11mm) in diameter.
• The right front detail consists of a primary raised rectangular panel with an additional secondary raised rectangular panel covering the top 1/3 of the primary panel. There is a column of three thin horizontal evenly spaced raised lines across the top 1/2 of the secondary panel.
• The abdominal armor is accurate in detail and proportion to official references.
• Light to medium weathering as per references.
• Cracking as per references.
• Cracks may be painted on surface in metallic gold paint.
• The armor is gold in color.

• There is a red leather or leather like waist band approx 2.5-3x the width of the belt.
• The top of the band is level with the bottom of the 3rd button down on the abdomen.
• There are 2 padded panels at the front, these panels are not rectangular and have a slight trapezoid shape.
  • The body of the panel is leather or leather like.
  • The front panels end approximately at the knee.
• There is a panel behind the padded front panels.
  • The bottom is pointed at approx 110°.
  • The panel ends mid thigh.
  • Made from the same material as the rear skirt.
• There are two trapezoidal quilted hip panels, these panels end mid thigh.
  • The quilting forms a vertical diamond pattern.
• There are two rear panels that form a half skirt.
  • The panels are same length as the front panels.
  • The panels do not wrap past the front of the hip.
  • The panels overlap at the rear, left over right.
• All panels have a thin red border.
• Kama is lightly weathered.

• Is made from black leather, or leather like material.
• Sits in the middle of the fabric band of the Kama.
• There is a front rectangular section slightly taller than the belt and is rounded on the right side.
  • There is a raised section on the left side which is pointed on the right end.
• A thinner top strip runs the length of the belt and overlaps the front section, with a pointed ends, forming the detail on the front of the rectangular section.
• There is a single popper shortly before the holster.
• Straps
  • There are two straps that loop down from the belt.
  • The straps are approx 2/3rds the width of the main belt
  • Mount to a short strap at the rear that hangs vertically on each side, and is looped over the belt.

• Is made from black leather, or leather like material.
• Is worn on the right hip
• Hangs from a single wide loop.
• Has 2 black poppers just under the belt loop.

• The thigh armor is mirrored for each leg and not interchangeable.
• The cover strips are beveled and approximately 1/8" (3mm) thick that does not extend beyond the thigh and has a smaller cover strip layered thereon.
• The top edge of the thigh armor is unadorned, and the bottom edge has a raised detail that follows the bottom edge contour.
• Light to medium weathering as per references
• Cracking as per references.
• Cracks may be painted on surface in metallic gold paint.
• Right Side
  • The thigh is predominantly gray
  • There is a gold colored section at the bottom of the thigh
  • There is a white colored section at the bottom of the thigh
  • The small ammo belt consists of 5 evenly spaced rectangle ammunition boxes and is installed on the bottom of the right thigh, there are no visible screws or rivets.
  • The ammo belt it gold in color
• Left Side
  • White in color
  • There is a gold colored section on the outside of the thigh at the bottom.

• The greaves are mirrored for each leg and are not interchangeable.
• The top edge of the greaves has a raised detail that follows the top edge contour.
• The bottom edge of the greaves flairs out to cover the top of the ankle and boots.
• The cover strips are beveled and approximately 1/8" (3mm) thick that does not extend beyond the greave and has a smaller cover strip layered thereon.
• Greaves are loosely held closed in the back with elastic, shock cord (bungee cord) or white Velcro and are designed to remain flexible. Closures must not be visible when worn.
• Cover strips will cover both the front and rear joints.
• The trapezoid knee plate (sniper knee plate) is affixed to the top of the left greave and there are no visible screws or rivets.
• Sniper knee plate must be aligned with the vertical cover strip and the top raised edge detail on the greave and is accurate in detail and proportion to official reference.
• Light to medium weathering as per references.
• Cracking as per references.
• Cracks may be painted on surface in metallic gold paint.

• Boots are above ankle height and the same style as the First Order TK. Chelsea type boots in the style of OT TK are not acceptable.
• Boots are all white and made of leather or leather-like material
• Flat black soles without a heel.
• Patent leather or high gloss is not permitted.
• Light to medium weathering as per references

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• The blaster has an extended cone shaped barrel.
• There are 3 gold colored rings on the blaster
  • 1 on the extended barrel
  • 1 at the start of the barrel
  • 1 at the rear of the blaster
• There is a narrow scope that runs approximately from the rear of the blaster to the top front sight.
  • The scope is flared out at the rear
• Hand grips are gold in color.