First Order Commander Hask

Visit the Gallery for this Costume for more models and parts views.

Model ID 33633, Photo by Vicky Walker
Description: First Order,Commander Gideon Hask
Prefix: ID
Detachment: Imperial Officer Corps
Context: Battlefront 2

Gideon Hask was a loyal member of the Imperial special forces team Inferno Squad, decades after it was believed he was killed at the battle of Jakku, Hask reappeared as a First Order Officer in command of the Star Destroyer Retribution, overseeing Project Resurrection.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

The short cut hair is brown with salt and pepper coloring.
Short cut brownish beard and mustache and graying sideburns.
A healed scar begins at the costumers left cheek area and runs down to the chin. The scar is lighter than the costumers skin tone, and hair is missing from the areas that the scar is present in.

• The front brim is a black leather-like material. It is curved and does not obscure the wearer's eyes.
• The hat fits snugly on the head.
• There is a tall brim around the back half of the hat. This piece is not higher than the dome of the hat and is vertical with a slight tilt outwards around the sides and back.
• The First Order emblem is centered in the front of the hat's dome. It is black and white.
• The base hat is made from the same material as the tunic.

• Fabric is a medium weight, dark charcoal grey drill or suiting material.
• The tunic is fitted to the wearer.
• The closures are hidden inside the opening of the tunic.
• A single seam is present at the rear the whole length of both sleeves, and a visible seam line separates the sleeve from the straight cuff portion on both sleeves and is below the rank band on left arm.
• A blank First Order rank insignia is attached on the left arm.
• Two cylinder loops are present on each side intersecting with the front chest seams.
• The collar is snugly fitting, classic-style, and has a visible closure panel across the front of the neck.
• Front: The front seams on the chest curve back into the torso intersecting the cylinder loops.
• There are four seams at the front of the bottom of the tunic two each side of the buckle starting under the belt.
• The tunic is open to the front below the belt in the center.
• Back: There are princess seams on the back.
• There is a seam to the rear of each side of the torso from under the arm continuing to the bottom.
• 2 seams on the skirting are present at the back continuing from the princess seams.
• On the back below the belt there is a center vent.

• Worn on the left side of arm, above the wrist and below the elbow and is a black band sewn down to the sleeve.
• The edges of the bands utilize white piping or a white embroidered line on each side.
• The rank bar is void of detailing.

• Fabric is a medium weight Dark charcoal grey drill or suiting material matching the tunic.
• Flared riding breeches have subtle, semi-stiff flares in the hip/thigh area, below the tunic and above the knee.
• There is a fold on the legs creased from back to front, directly below the jodhpur flares, tucking tightly into the boots, over the knees.

• Knee-high, black, lace-less, smooth non-textured, leather or leather-like material, with moderate to high-gloss shine.
• There are no stretch panels, buckles, snap tabs, or decoration.
• Boot seams closely match screen-used boots.
• Soles are flat.
• If zippers are present, they are on the inner part of the boot shaft.

• Gloves are constructed of a non-textured, black leather or leather-like material.
• Gloves are have enclosed fingers, are fitted, and worn underneath the sleeves.
• No visible buckles, straps, or ornamentation.

• The belt is constructed from a black, non-textured leather or a leather-like material.
• The belt is approximately 2" to 2.5" in width.
• Belt fits snugly over the natural waist of the wearer.
• There are no loops on the belt.
• Sizing holes on either side of the buckle are acceptable.
• The buckle is constructed from a horizontally brushed metal, or metal-looking material.
• Buckle is free of decoration, greeblies or insignia.
• Buckle is rectangular, with sharp-angled edges, approximately 4.5" to 5.5" long & 2" to 3" high.

• The holster is affixed on the costumers right and begins just below the buckle. There is a metal tongue connector which affixes under the main buckle there is a small rivet adjacent to it.

• Four (4) code cylinders, two on each side of the tunic.
• Cylinders are smooth tubes, with a lip at the top and an indented bottom.
• There is a metal clip attached to the top, extending one third of the way down the cylinder.
• Both cylinders and clips are silver in color.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• Blaster matches the in game model.