Juno Eclipse (Dress Uniform)

Model Juno Eclipse (Dress Uniform), Photo by Unknown
Description: Juno Eclipse (Dress Uniform)
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars: The Force Unleashed

Juno Eclipse serves the Galactic Empire as an Imperial officer and pilot. She is recognized as as a skilled pilot, talented mechanic and model officer. These traits allowed Juno to rise through ranks of the Imperial Navy in record time.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• Hat is OPTIONAL but only if a specific referenced licensed character’s typical uniform configuration is copied in full, and does not typically include a hat.
• Fabric is a medium weight suiting material matching the pants and tunic if applicable.
• Cavalry Twill or a Gabardine style weave is most accurate.
• Black color matches the pants.
• Base of the hat is conical, with a crown about 4" (101.6 mm) tall.
• Front and rear “flaps” overlap on the sides, with the back flap over the front, and are about 4 inches (101.6 mm) high.
• Front bill extends 3" down, and may be decorated with (5) (6) or (7) concentric stitches, but this is not required.
• Dimensions of the hat are are relative and proportional to the costumer.
• Imperial Code Disk is positioned in the center of the front vertical "flap."

• Hair is blonde; achieved via natural hair color or a naturally styled wig.
• Worn in a French twist with tendrils framing each side of the face.

• Open back, full-fingered driver gloves of leather or leather like material.

• Fabric should be a medium weight suiting material exactly matching the pants and hat.
• Tunic is double-breasted with a left over right closure on the tapered yoke.
• Yoke comes up across the shoulder to the top shoulder seam.
• The standing collar has square corners and is about 1.25" (31.8 mm) tall, closes snugly and includes a modesty panel behind closure.
• There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
• Sleeves are long, and without decoration, cuffs or buttons
• Tunic should be constructed with no top-stitching (stitches visible on the exterior surface of fabric)
• Hook and eye fasteners on the uniform should not be visible.
• Princess seams or bust darts to achieve a fitted appearance are permitted, though not required.
• Uniform is to be pressed and free of a wrinkled appearance.

• Worn on the left side of the tunic over the heart.
• Rank consists of colored plastic tiles mounted on metal or metal looking bar.
• Rank tiles are 4 amber and 2 red (from left to right), made of some type of plastic (i.e. plexiglass, acrylic, etc.)
• Yellow tiles are not acceptable.
• Rank tile dimensions are approx. 1/2" (12.7 mm)width x 3/4" (19 mm) height and about 1/8" (3.2 mm).
• Tiles are mounted with approx. 1/4" (6.4 mm) spaces between them.

• (2) code cylinders, are worn, one on each side of the tunic.
• Three styles of code cylinder are permitted, but the two cylinders worn must match each other:
• Modified Calk Holder: Silver "chalk holder" tube with a short clip. Top is colored Blue.
• Dosimeter Style: True Dosimeter with correct clip and Blue top.
• Alternate Style: Silver clip with no blue top.

• The belt is constructed from a black, non-textured leather or a leather-like material.
• Approximately 2 inches (50.8 mm) in width, up to 2.5 inches (63.5 mm) is acceptable.
• There are no loops on the belt.
• A single silver large snap or rivet may be visible approximately 1" (25.4 mm) from the buckle but is not required.
• If present, the belt may be worn with the snap to the right or left of the buckle.
• It is preferred to wear the snap to the left of the wearer, unless emulating a specific licensed character.
• The buckle is constructed from a horizontally brushed metal, or metal looking material.
• The buckle size is approximately 2 ⅛" (66.7 mm) high and 4 ⅛" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
• Buckle is adorned with an Imperial Code Disk at the center, which may be notched or notchless.
• Please refer to the Imperial Buckle reference page for information on accurate and inaccurate style buckles.
• Belt may have a groove approximately 1/4" (6.3 mm) from the top and bottom edge along the length of the belt.

• Fabric is a medium weight black suiting material matching the tunic and hat.
• Pockets are acceptable, although they are not visible with the tunic on.
• Pants are neatly pressed or ironed, without a center crease.

• Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material.
• There are no buckles, snap tabs or decoration.
• Boots have conservative heels.
• A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft.
• Not visible from the front, side or back.
• The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.