Captain Argyus

TR_CLONEWARSARGYUS

Model TR-4126, Photo by Stephen Davenport
Description: Captain Argyus
Prefix: TR
Detachment: Sovereign Protectors
Context: Star Wars: The Clone Wars Season 1, Episode 9

Captain Faro Argyus was a member of the Senate Guard, a group of soldiers sworn to uphold the laws of the Republic. Argyus betrayed those vows, conspiring with Count Dooku and the Confederacy of Independent Systems to release Nute Gunray from republic captivity. His betrayal of the Republic and loyalty to Count Dooku earns him a place in the 501st.

This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. SP defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

TR_animated_argyus_helmet_front

Helmet

  • Helmet must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Open visor
  • Crest center of helmet
  • Grey stripe around on sides of helmet.

OPTIONAL Level two certification (if applicable):
Helmet must be weathered.

TC_animated_neckseal

Neck Seal

  • Neck seal is black in color with no ribbing.
  • No logos or labels are visible.

OPTIONAL Level two certification (if applicable):
Neck seal closes in the front via two small black snaps.
A black balaclava is worn with the neckseal.

TK_anh_stunt_undersuit

Under Suit

  • Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.

TR_animated_argyus_shoulderbells

Shoulder Bells

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Armor must be padded so as not to sit flat against the arms. The top of the bell should sit 3/4" - 1" above the natural shoulder.
  • Shoulder Shield should have animated version of Republic Senate Logo. Logo should match up to details with the shape of shoulder shield. The Logo should be painted matte white.
  • Shoulder Shield should rest 2” above normal shoulder placement.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_bicep

Right Bicep

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
  • Armor must be seamless. No visible traces of how the armor was assembled should be shown.
  • To be placed on the right arm.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_forearms

Forearms

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Right forearm must have a compad that has 4 main square recessed areas and 1 slightly smaller square recessed area. The smaller recess is closest to the elbow.
  • Left forearm must have 3 stripes matching up from Shoulder Shield down. The Stripes should be painted white.
  • Armor must be seamless on the outside edge. Due to the shape of the armor, a butted seam is acceptable on the inside if required.
  • Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.

OPTIONAL Level two certification (if applicable):
Armor must be seamless. No visible traces of how the armor was assembled should be shown.
Armor must be weathered.

TR_animated_argyus_handplates

Hand Plates

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Right handplate is to be solid royal blue. Left handplate is to be royal blue with white stripes.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

Generic-black-gloves

Gloves

  • Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
  • Gloves cover any exposed skin.
  • Gloves do not show any labels or logos when the armor is worn.

TR_animated_argyus_chest

Chest Armor

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Lower portion of the chest has a curved notch for the abdomen armor to fit into.
  • Chest and back plate must match together at the sides and shoulders with no gap. Butted seam lines are permitted if required.
  • Shoulder straps must be placed over the chest and back armor at the seams.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_back

Back Armor

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Rear tank has detailed area that contains a O11 pattern similar to a stormtrooper.
  • Shoulder straps should be placed over the chest and back armor at the seams.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_ab

Ab Armor

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Top edge of the armor is curved to match the chest.
  • The ab armor protrudes out in the middle to better up with the chest.
  • 4 inset lines divide the ab plate into segments.
  • A butted seam between ab plate and kidney is acceptable.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_kidney

Kidney Armor

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • A butted seam between ab plate and kidney is acceptable.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_cod

Codpiece and belt front

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Belt is approx 3" tall and divided into 1.75" wide segments. The front segments have a key/slot detail.
  • Belt boxes are mounted at the hips. Butted seams are permitted at this connection if required.
  • Cod and Posterior armor should connect at the hips.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_butt

Posterior Armor, belt rear and detonator

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Belt is approx 3" tall and divided into 1.75" wide segments.
  • Cod and Posterior armor should connect at the hips. Butted seams are permitted at this connection if required.
  • Detonator is centered on the back of belt with no control buttons. The detonator has 2 lines set in approx 1/2" - 5/8" from the edges. Lines may be recessed or painted on

OPTIONAL Level two certification (if applicable):
Armor must be weathered.
Detonator lines must be recessed.

TR_animated_argyus_belt_box

Belt Boxes

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • 2 rectangular boxes are mounted at the hips. The top edge of the box is tapered town toward the outside. There is an inset detail near the top of each box.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_thighs

Thigh Armor

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Front of thigh armor should have a flat triangular area near the knee with a notch cut out for the knee armor. From the top of the triangle a ridge line should go up the front of the thigh to the top.
  • Armor must be seamless. No visible traces of how the armor was assembled should be shown.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_shins

Lower Leg Armor

  • Armor must be painted matte royal blue. If weathered, the weathering should be shades of grey.
  • Knee armor is integrated with the lower leg.
  • The armor should have a flat center triangle below the knee plate, with the single point facing downward.
  • The calf detail of the armor has a ridge wrapping around the back of the leg.
  • Due to the shape of the armor, a butted seam is permitted on the inside or back of the shin.

OPTIONAL Level two certification (if applicable):
Armor must be weathered.

TR_animated_argyus_boots

Boots

  • Royal blue, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area in armor. Boots must be lace-less and have flat soles.
  • Boots have a center strip running from the toe to the ankle, a strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.

OPTIONAL Level two certification (if applicable):
Boots must have accurate notched sole.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

CRLdc15s-animated

DC-15S Blaster Carbine (animated style)

  • Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.
  • This is the animated variant of the DC-15S blaster rifle.