Qi'ra: Vandor

Visit the Gallery for more models and parts views.

Description: Qira
Prefix: DZ
Detachment: Underworld Detachment
Context: Solo: A Star Wars Story

Qi’ra was a human female from the planet Corellia who lived during the reign of the Galactic Empire. She grew up on the streets along with Han Solo before becoming part of an opulent life working for the Crimson Dawn gang.

This is a visual guide used for 501st costume approval, not a how-to for construction. Construction details are found at the costume's Detachment website. Measurements provided here are are generalized, and not criteria for approval. All 501st costumes are proportionate to the wearer in terms of size, fit, and scale. During evaluation, both text and images (CRL and Reference) must be considered. When in doubt about a feature of a submitted costume, GMLs should post questions in the Legion forum's DL/GML peer review section.

Required Costume Components

The following costume components are present and appear as described below. For 501st membership only the requirements in black need to be met. This Detachment defines additional, optional costuming details listed in blue and red. Please visit the Detachment website for more details on these options.

• The hair is brown in color and pulled into a pony tail and lightly curled.
• There are short bangs reaching the top of the wearer’s eyebrows.
• The bangs are styled to the wearer's right side with an off-centre parting on the left.
• This can be achieved with the wearer’s own hair, or a high quality, properly styled wig.

• The jacket ends below the costumer’s natural waistline.
• The jacket is cream or light beige in color and made from suede or suede cloth.
• There is a large collar that has an inset of fur that resembles dark brown mixed with black sheep skin.
• The sheepskin lining does not need to continue the full length of the jacket interior but the endpoint inside the jacket should not be seen.
• The tips of the collar when laid open extend to the end of the wearer’s shoulders.
• When the front flap of the jacket is closed, the tips of the open collar should lay against the front of the shoulders, and not extend past them.
• There are two rows of dark brown tubing extending down the inside of the right front flap, extending from the code cylinder greeblie to near the bottom of the inside of the jacket, which is visible when the collar is splayed open.
• The inside edge of the jacket lapel is made from the same material as the main body of the jacket, up to the line of the sheepskin collar lining.
• There are three equally-spaced rows of double stitched lines along the collar.
• Dark brown piping runs the entirety of the outer edge of the collar and extends down to the outer edge of the front lapels of the jacket.
• Small black Code Cylinders are attached on each side of the jacket collar, connected at the joining of the sheepskin insert and outer collar.
• The Code Cylinders have accurate dosimeter clips on top, in matching gloss black color to the cylinder shafts.
• The sleeves are form fitting and tailored to the wearer.
• There are knife pleats on the inside of both sleeves; they run the full length of the sleeve to the cuff.
• The knife pleats down the underside of the sleeves have piping which matches the main color of the jacket on both sides
• At the back, the piping continues up into the raglan sleeve atop the shoulder.
• The cuff has brown piping at the top where it connects to the sleeve.
• There is dark brown piping starting at the shoulder seam, along the outside edge of the sleeve, ending at the piping for the cuff.
• There is an underarm vent that is finished with a facing of the same material as the jacket.
• The back of the jacket has princess seams that have piping matching the jacket color.
• The jacket fastens right side over left, with 4 (four) bar hook closures.
• The front panels have piping along the attached edge which matches the main color of the jacket.
• The side seem panels do not have piping.
• See gallery for additional reference images.
• There is a wide waistband, that is approximately two (2) inches in tall on the bottom edge of the jacket.
• The waistband starts next to the centre front panel of the jacket and is accented on the top with piping made from the same material as the jacket.
• There is a small rectangular greeblie located on the right side of the waistband.
• The greeblie is rectangular in shape, is black or very dark grey in color with inlay and squares and features a single red square on the left.
• See gallery for additional references.

• Simple V neck crossover shirt made from black peachskin or washed silk fabric.
• There is a thick trim around the neck that extends the full length of the wrap front.
• The shirt wraps around the wearer, with the left side wrapping over the top of the right side.
• There is a wide waistband at the bottom of the shirt. This band is wider than the trim around the neck.
• The shirt waistband has ties at the back.
• When tied at the back, the ends hang down.
• The sleeves have a loose fit, and end above the costumers elbow.
• The shirt has a keyhole opening that closes with a button and a loop at the back of the neck.

• Knee length skirt is made from leather or leather like material.
• High waist with a wrapping style design.
• The skirt opening is located near the costumer’s mid-section.
• There is no hem on the front edge or bottom.
• Dark colored nylon leggings are worn with the skirt.

• Belt is black leather or leather like material and approximately two and a half (2.5) inches wide. There is white trim at the top and bottom made from a similar material as the rest of the belt.
• The belt has two strips of decorative white stitching on the belt, they run parallel with the white trim edges.
• The belt is curved to fit over the costumers hips.
• The belt closes with velcro at the back of the belt, and should be as un-noticeable as possible.
• The belt has a silver metal or metal-like buckle that folds around the belt and is worn on the front of the costumers left hip.
• A holster made from black leather or leather like material is attached to the belt at the costumers right hip.
• It features an insert made from white leather, or leather-like material that is stitched in with black thread to form the back seam.
• Just in front of the holster is a leather strip sewn to the belt, to create four (4) loops.
• Inside the loops are four (4) silver greeblies. The greeblies have detailed brass points at the top and bottom.
• The greeblies are linked into two (2) pairs by a silver clip with black accents on the top and bottom.

• Boots are black leather or leather-like material and have a moderate heel.
• If a zipper is present it is located on the inside of the boot.
• On both sides of the boot a small greeblie with a red dot on the left and a metal oval at the bottom is attached to the top portion of the boot.
• Below this top greeblie is a set of three (3) small bars no wider than the greeblie.
• A Black leather ankle spat on the boot covers the front and wraps around the sides.
• The spat has a boarder of white stitching and there are two rivets holding a leather strap around the back of the boot.

• A thin silver chain with a rectangular bar. The center is recessed.
• The necklace is attached at the right and left side of the bar.

• Simple chunky hoop earrings that are silver in color and wrap around the costumer’s ear.

• Worn on the costumer’s right hand pinky and is a single black ring with a round green translucent jewel in the center.
• The ring has a glossed finish.

• The bracelet is worn on the costumer’s left wrist and is silver in color.
• It is a wide cuff style bracelet.
• The bracelet has two rectangles cut into the back side of the opening.

Optional Accessories

Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.

• The costumer’s nails are painted in a dark metallic color.

• Crimson Dawn brand is created using makeup or prosthetic, it is located on the costumer’s inner right wrist.
• The brand is partially concealed by the jackets sleeve.
• Darker than the costumer’s skin tone in color.
• The design is a circular shape with another half circle.

• Simple black leather or leather like gloves with a D shape in the top.

• Brown fur pelt or simulated natural tone pelt with hints of black. The pelt has a full top and ends in points, it wraps around the wearers shoulders.
• The pelt is uneven and approximately elbow length around the costumer.
• If the Pelt is worn, gloves are required.

• Communicator with silver details and a small red button.
• The device is as tall as the belt.
• Communicator is affixed onto the belt just behind the holster.

• Double-Barrel Blaster is silver in color.
• A replica of the Monlitzer S-195 is acceptable.